Add:No.1,Jingqi Road,Hi-tech Zone, Yantai City, Shandong Province, China
Sales Hotline:+86-18663896299
Customer Service Department:
Tel:+86-535-6726618
Fax:+86-535-6726618
E-mail:haige@haigechina.com

ProductsYour current location:Home > Products > Centerless Lathe >
WXC30C Centerless Machine Tool
Release time:2014-08-19 16:18
Introduction:
Specification WXC30C
Raw Material Diameter Range (mm) Φ6~Φ32
Raw Material Length (mm) ≥1400
Tensile Strength (M pa) ≤1100
Surface Hardness ≤HB320
Curvature (mm/m) ≤1.5
Diameter Tolerance according to GB 702-88 second group
Roundness(mm) ≤50% of diameter tolerance
Surface Roughness (Ra) ≤25~50mm
Finished
Goods
Diameter Range (mm) Φ5.5~Φ30
Unilateral Cutting Depth (mm) 0.2~1.0
Diameter Tolerance ≤IT9 (standard tolerance grade)
Surface Roughness (Ra) ≤6.3μm
Roundness (mm) ≤0.03
Feeding Cutting Speed (m/min) 1.0~8.0(for continuous chips and high strength and hardness should reduce the speed)
Cutter Head  Rotational Speed(rpm) 900-2500
Main Machine Motor Power (KW) 30 (2 Poles)
Auxiliary Machine Motor Power(KW) 4  X 2(4 Poles)
Main Machine Outline Dimensions
(Length*Width*Height)  m
2.0mX2.2mX1.5m  (for your reference)
Full Set Machine Outline Dimensions
(Including auxiliary machine) m
 12.0mX2.2mX1.5m  (for your reference)
Main Machine Weight
(including auxiliary weight) (T)
3.3 (4.5)
Total Capacity(KW) 65KW
Compressed Air Source(user prepare by themselves) 0.5~0.8MPa、1.8m3/min、more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier

Attention:
Raw materials bending as small as possible, so as to better ensure product accuracy, the efficiency and the service life of equipment. If the raw material straightness is larger, turning before straightening, otherwise it will seriously affect the product precision, efficiency and life of equipment. If the raw head having severe flash, flat head and bending, turning before resection of flat head and a bent portion, flying edge chamfering.

内蒙古11选5开奖 极速PK拾 荣鼎娱乐 秒速时时彩 极速飞艇 67娱乐系统 极速飞艇 荣鼎娱乐 PK10牛牛 上海11选5